Broadway Media's Common Mount Instructions

Step 1: Prepare mount plate

  1. AFFIX TRUSS ADAPTER Hang the “U” bolt over the pipe and affix adapter plate using M10 washers (C [x4]), lock washers (D [x4]) and M10 Hex Nuts (E [x4]). 
  2. INSTALL VERTICAL PIPE Twist threaded vertical pipe into threaded adapter mount, and secure using screws (F or G). Tighten with allen key. 
  3. CONNECT PROJECTOR PLATE  Twist threaded Projector Plate (B) on to vertical pipe and secure using set screws (J). Tighten with allen key. 
  4. SECURE PROJECTOR PLATE Secure using set screws (J). Tighten with allen key

Step 2: Prepare mount brackets

  1. ADJUST MOUNTING Insert screws (G2) in the top of bracket fixture using allen key. Screw down 50%, leaving a gap between fixture and screwhead. 
  2. INSTALL BRACKETS TO PROJECTOR Expand extension brackets using allen key. Affix to projector using screws (E/F/G-1/H) and washers (I) as shown. 

Step 3: Hang the projector

  1. AFFIX MOUNTING TO PLATE Slide projector and projector mount on to plate until you hear a “click!”. Tighten screws (G2) using allen key
  2. MAKE ADJUSTMENTS Perfect the viewing angle by slightly loosening screws and turning the projector to desired angle. Secure by tightening screws with allen key.

Still need help? How can we help you? How can we help you?