Packaging Instructions: Economy LITE

When you receive your projector rental, take note of how things were packed into the shipping crate. Repacking in the same way, with all of the protective foam in place is critical in reducing the risk of damage.

Note: Always return both Allen wrenches with the recessed holes on the end that come with our LITE packages, they are not disposable.

In the black, projector shipping crate:

Unlock the latches on the black plastic shipping create and open the lid
On top will be a protective foam layer; ensure this foam does not get damaged or ripped
The projector is placed in a large cavity with just enough room for hands to pull the projector out and place it back in
Place projector's underside (that has the mount attached) down into case; NEVER place projector upside down into the case
- If you adjusted the pre-attached spider bracket portion of the mount, please revert it back to the way it was delivered (adjustment to the mount can create pressure that crack the body of the projector during shipping)
Place remote and power cord neatly in the slotted area in the protective foam
Close the lid and lock the latches
Secure the zip-tie on the outer metal ring on the shipping crate and pull tight
Place the printed, return shipping label (with the weight listed 60lbs) on the front exterior of the case

In the orange, accessories shipping crate:

Place the second half of the mount, the 50ft power cable, and the 50ft HDMI cable
Repack any padding/foam into the places around the cables and mount
Secure the zip-tie on the outer metal ring on the shipping crate and pull tight
Place the printed, return shipping label (with the weight listed 19lbs) on the front exterior of the case

[photo of both cases open and packed with all the material and soft foam in the projector case]

[photo of a sample return label and zip tie]

[photo of the interior of the projector crate (with projector, remote, and power cord inside)]