FAQ's
- What equipment do I need? – This depends on what type of package you go with. For most packages, all you’ll need is a sound mixer, speakers, and cables to connect the two! Please reach out to us at sales@broadwaymedia.com and we’ll talk you through your unique set-up
- How many channels do I need? – How many characters does your show have? Each microphone will need its own channel, so counting your actors is a great place to start.
- What type of microphone is best for me? – This all depends on your vision for the show, and where you would like to place the microphone on your actors. You can use a directional headset that places the microphone directly in front of their mouth, a microphone connected to an earpiece, or one that you can tape to your actor’s face or clip on their clothing. Feel free to send us a message at sales@broadway.com and we’ll work with you to find the best microphone for your show!
- Does the frequency I choose matter? – You will want to set up each of your wireless channels on a frequency that has minimal interference. Different wireless systems are capable of finding different frequencies. If you have a small number of microphones or are in a more isolated environment, the frequency you choose does not matter as much. However if you have a large number of microphones or if you are in a very populated place with a lot of wireless signals, it may be advantageous to rent multiple receivers at different frequencies to ensure a clean signal
- How do I connect this to my mixer? – Your rack will come with loom cables to connect to your sound mixer
- Do I need a paddle antenna extension kit? – This depends on where in the venue you want to place your receiver. If it’s more than 50’ from your actors, we’d recommend adding a paddle antenna extension kit for the best sound
- What port do my antennae attach to? – Your system will have “in” ports, and “out” ports. The antenna receives the wireless signal, so it should always be attached to your “in” antenna port.
- Analog vs Digital – This is the way the audio signal is transmitted. Digital Audio will generally lead to better sound quality, because the audio signal is not being compressed. It will also allow for better RF Performance (meaning less wireless interference issues), since you can fit more channels in the same frequency range
- For example: if your receiver scans frequencies between 580 and 630, the analog receiver may find 30 available channels. But the digital one will find 100! This can be especially advantageous if you’re performing with other wireless systems nearby. Here is a helpful instructional article from Shure
- Where do I place the microphone on the actor? – This depends on the type of microphone you rent, and where you want to place it! If you go with a Cardioid microphone or an earset microphone, these are attached with a headset or earset (single-ear) for your actor. With a lav mic, you can attach it to your actor’s clothes or attach it to their face with facetape