Economy: Flipping an Upside Down Image

If you turn on your projector and find the image (and the menu) is upside down, it’s likely because the device is set to "Ceiling" or "Front Upside Down" mode. Here is a video demonstrating how to flip it back.

How to Flip an Upside-Down Image

1.  Access the Menu: Press the Menu button. (Note: You’ll have to navigate the menu while it is upside down, so take it slow!)

2. Navigate to Installation: Locate and select the Installation tab.

3. Find Projection Settings: Look for the option labeled Projection.

4. Change the Mode: * The current setting will likely be Front Upside Down (or Ceiling).

Toggle this setting until it simply says Front.

5. Confirm: Once selected, the image should immediately flip to the correct, upright orientation.

Why did this happen?

Projectors are often shipped or previously used in a ceiling mount configuration, which requires the image to be inverted. Switching it to "Front" tells the projector that it is sitting upright on a table or shelf.